banner
Home / Blog / Prusa MK4 Review: Return of the King
Blog

Prusa MK4 Review: Return of the King

Jun 15, 2024Jun 15, 2024

Prusa’s MK4 sticks the landing with exceptional performance and amazing improvements to auto bed leveling, while still keeping a path to upgrade for MK3 owners.

Fully assembled or DIY kit

Faster than MK3

Direct drive

Linear rods

Dual Z axis

Auto bed leveling

PEI Steel flex plate

All metal hotend

Very quiet

Expensive

Released without Input Shaping

Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.

The long awaited sequel to Prusa Research’s MK3S+ has finally arrived after years of waiting.

On paper, it looks like the Prusa MK4 is merely playing catch up by adding new features we’ve already seen on the market. But somehow, this machine is more than the sum of its parts.

The MK4 has a new take on auto bed leveling that produces perfect first layers and automatically sets the Z height. Also new is a planetary geared “Nextruder” which has larger contact area to grab and control the filament, a 32 bit board, and a quick-swap nozzle.

The MK4’s new custom firmware is heavily influenced by Klipper, which should allow for precise high speed printing. It's disappointing that Input Shaper and Pressure Advance – both touted on the MK4’s sale page – have been left for a future update. It shouldn’t be a long wait as Josef Prusa has shared video of a MK4 printing a blazing fast sub 20 minute Benchy.

Surprisingly, Prusa Research didn’t increase the price for its flagship printer. Retailing at $1099, the MK4 is still a bit of an investment. You can choose to save money by going the DIY route and buying a kit for $799. Remaining stock of MK3’s are on sale for $899 assembled or $649 as a kit. Owners of MK3S+ machines can also go the upgrade route with kits starting at $249.

The Prusa Original MK4 is one of the best 3D printers we’ve ever tested and lives up to its reputation as a premium printer for makers of all experience levels.

The Prusa Research MK4 we reviewed came fully assembled and only needed to be unpacked. It comes with the full tool kit you would get with the build it yourself version. You won’t need these right now, but hang on to them for future upgrades.

Besides tools, the printer comes with a full spool of Galaxy Black Prusament PLA, a USB Stick, a handbook on 3D printing with your new machine, stickers, and a bag of Gummy Bears. The USB stick contains several models, while PrusaSlicer is available for free download from the website.

We also received a few bonus items for the review: an adapter to use traditional nozzles and extra build plates.

The Original Prusa MK4 is the successor of the often cloned Prusa Original MK3. It bears a striking resemblance to the previous generation, which allows Prusa Research to offer upgrade kits to loyal customers so they don’t need to throw out their old MK3s. More about the kits later.

The MK4 retains the classic Prusa orange and black theme while having updated 90% of the machine, according to Josef Prusa himself in a blog post. The frame is now a powder coated die-cast aluminum-alloy, made in house, that looks quite a bit like the company’s sparkly Galaxy Black filament. The orange parts are still 3D printed at Prusa Research in PETG Prusament, using a farm of MK3’s and MK4s. Prusa has stated that he still uses 3D printed parts to prove his machines are up to the task.

This brings up an interesting point – though the launch of the MK4 was a surprise to everyone outside the company, Prusa Research has been testing the new printers around its office and factory for about a year. This also means the MK4 customers receive, has already been thoroughly vetted by Prusa’s team and should be relatively bug free.

The machine has everything you’d expect to find in a new i3 design. It has dual Z axis, auto bed leveling, whisper quiet fans, a magnetic flex plate and a color screen. Files can be transferred with a front mounted USB port or through WiFi.

What’s most exciting is the new firmware, which Josef Prusa told us in an interview, is based on Marlin, yet heavily influenced by Klipper. The new firmware will allow the MK4 to run faster while still retaining quality. It’s not quite finished and we are still waiting for an update for Input Shaping, which will really tune the printer for high speed printing. Prusa said it should be ready for release about a month after the launch date.

Back to hardware, the E3D extruder and hotend has been replaced with the Prusa made “Nextruder”, which you’ll also find on Prusa’s new XL 3D printer. It uses a 35mm no-slip drive gear powered by a 10:1 planetary gearbox and a pancake stepper motor.

The part cooling fan is mounted on a hinge, allowing it to swing aside for easy access to the hotend, which has also been redesigned. Influenced by E3D’s Revo system, the new MK4 has a quick swap nozzle that includes the heatbreak and an all metal filament guide in one sealed unit.

The new combo nozzles are sold for $27.90 on Prusa3d.com, made of brass and come in sizes from .25 to .8mm. You can purchase an adaptor for $29.99 that will allow you to continue to print with any V6 nozzle. The adaptor is exactly the same as the new nozzle, except it ends with threads for holding a normal V6 nozzle. It may be cheaper to buy an adaptor and continue to use “regular” nozzles.

Bed leveling is fully automatic, with no manual adjustments. First layers go down perfectly smooth thanks to a load cell sensor that has replaced the old PINDA probe. The sensor is connected to the nozzle, which allows the MK4 to physically tap the print surface for a more precise measurement. The sensor is also used to calculate Z height, and it does it so well that there is no need for human intervention. Of course, there’s still a live Z adjustment available in the menu should you need it. During testing, we did not.

One of the fun tests you can do to check out the MK4’s first layer handling is to print a single layer thick rectangle the size of the entire bed. It peels up like a sheet of paper. None of the other printers I have running were able to duplicate this feat as well.

The MK4 has built in WiFi, another new feature we love seeing on printers. This allows you to securely access your machine from a local area network or through Prusa Research’s cloud based Prusa Connect.

Prusa is known for offering customers upgrade kits to prevent his machine’s from becoming obsolete. The MK4 is keeping with the tradition.

There are three kits available. The MK3.5 upgrade contains the 32 bit board and a touch screen for $249. This gives you more processing power and access to input shaper when it’s made available. You also gain Wi-Fi. This is the best bang for your buck, especially if you have added a new hotend you want to keep.

The MK3.9 kit is $499 and includes the board, screen and Nextruder. There’s also a full MK4 upgrade for $579 includes everything in the previous kits plus the new stepper motors.

The Prusa MK4 we reviewed came fully assembled and only needed to be unpacked. Simply pull it out of the box and plug it in. The only screws I needed were to mount the spool holder’s filament guide.

Every Prusa MK4 is given a thorough inspection before shipping. A checklist showing the parts inspected is included in the box. You’ll also find a sample print stuck to the bed from its factory test.

Note: if you purchased the DIY kit version of the MK4 you’ll need to set aside around 8 hours to assemble it but you will save $300.

Once the machine is turned on, you’ll see a cartoon version of Josef Prusa to guide you through setup. The MK4 will run a few hardware checks then walk you through loading filament. Once the material is loaded you can pick your first print from the USB card. It will perform a bed level check and set the Z height before printing (and without asking you for help).

Bed leveling is a no-brainer as the MK4 Is fully automatic. There are no manual adjustments and no need for adjusting the Z offset. The printer uses a load cell sensor connected to the nozzle, which physically taps the print surface for precise measurement.

The printer trams the bed and calculates the required z height before each print.

Loading filament is very simple. Simply place filament into the hole on the top of the extruder and it will automatically detect it and pull it in. The screen will then ask what kind of material you’re using to set the temperature. Once it gets hot enough it will pull the filament into the hotend and ask if the color has changed. If it has, you can say yes and move on. If the answer is no, it will purge more material.

To remove material, go to the Filament menu from the main screen and click unload. It will remember what material was last installed, determine if the filament is still there and then heat to the appropriate temperature. Once hot, it will retract the plastic until you can easily remove it.

Prusa Research makes one of the most popular free slicers, PrusaSlicer. It includes profiles for Prusament — Prusa’s house made filament-– and a handful of popular 3rd party material. I’ve found that picking “generic” works for most brands.

If you prefer Cura, it has a profile for the old MK3, which is similar enough to the MK4 that it will work quite well.

To use the MK4’s WiFi you have to use a separate program, either Prusa Link or Prusa Connect. Prusa Link is a bare bones portal that connects to your printer over LAN or WiFi. You access it by typing in the printers’ network address. Prusa Link only allows you to upload files, start and stop a print, see the thumbnail and a few stats about your machine. However, once Prusa Link is established, you can connect your printer directly from Prusa Slicer and send a file to the printer without needed to open any other programs.

Prusa Connect is a more feature rich cloud based program, and can be used to control a single printer or a fleet of Prusa machines. It is not configured to work for 3rd party printers.

Prusa Connect gives you full remote access to your printer, rather like Klipper’s Mainsail. The program lets you see stats, the machine’s history of prints and stores up to 2 GB of files for free on the cloud. You can also access the machine’s USB storage and pull files from there, which is handy if you have a library of prints you repeat. You can also control the machine’s movements, temperatures, and change speed or flow during a print.

The webcam feature is intriguing, yet limited. It only takes still photos and doesn’t save them. If you want to take time-lapse video you’ll still need another method. It is really nice that you can use any webcam or old smart device with a camera. The camera is freestanding and needs its own power plug. I’m using an old iPhone 7 connected to a power strip with a USB charging port.

Prusa Link and Prusa Connect are still in beta and we hope to see more features released for these programs in the future.

The MK4 comes with a full roll of Prusament PLA Galaxy Black. If you want more colors and materials like silks and multicolor filaments, you should check out our guide to the best filaments for 3D printing for suggestions.

The USB stick has several pre-sliced models to show what the MK4 can do. I picked the Robo Alpaka, which is support free and full of intricate details and overhangs. The print turned out crisp and perfect. Printed in the supplied Galaxy Black, pre-sliced by Prusa Research with a .2 layer height, this took 7 hours and 46 minutes to print.

Next I printed this bust of Josef Prusa by Fotis Mint. Fotis is an excellent designer and there’s a lot of detail in this sculpt. I used a .15 layer height and the “quality” setting, which printed at a leisurely 45mm/s with 90mm/s on the infill. There were no supports and every letter is crisp, there’s detail in the hair and glasses and the skin came out super smooth. The print took 8 hours and 52 minutes altogether. The bust was printed in Prusament Galaxy Silver, and the base is in Prusament Galaxy Black.

To test PETG I whipped up a phone holder in Tinkercad that could hold my old iPhone at the correct angle to monitor prints. This printed incredibly smooth and without noticeable layer lines with a tiny fail right where the arch was not supported. It’s printed in Prusament Carmine Red at a .3 layer height, with 70mm/s on the walls and 200mm/s on the infill and took 2 hours and 57 minutes to print.

For TPU I printed a wallet, something that can be difficult for some printers. The wallet was still stringy, but all the pockets opened up and were bonded strongly. This was printed in Matterhackers’ Build Series TPU in Translucent Purple, with .15mm layer height, a 50mm/s speed and took 8 hours and 3 minutes.

The Prusa Original MK4 is a delightful machine to use, but you’re going to pay extra for Prusa’s reputation for quality and customer service. Retailing at $1099 for a pre-assembled machine and $799 for a DIY kit, the Prusa MK4 is not a budget machine, but it is definitely the best machine a beginner could start on. It’s perfect for makers who need a reliable workhorse and anyone who wants a tool, not a project.

As the MK4 remains open source, it’s also extremely easy to find parts and repair with a little bit of knowledge and help from your favorite YouTuber.

Fans of the Prusa brand are ecstatic for all the updates, especially the 32 bit board, KIipper-like speed, and the new method for auto bed leveling. The real question is whether people new to the hobby will think it’s worth $1099 when companies like Creality and Bambu have speedy Core XY machines for much less. It's disappointing that the MK4 shipped before Input Shaper was released so we can test its true speed.

If you like the MK4, but want something less expensive, much faster and with the same level of calibration sensors, check out the $699 Core XY Bambu Lab P1P. However, if you want to save a lot of money while still getting the perks of auto bed leveling and an easy to remove build plate, the Elegoo Neptune 3 Pro.

Denise Bertacchi is a Contributing Writer for Tom’s Hardware US, covering 3D printing.

Best Gaming Monitors 2023: Budget, Curved, G-Sync and More

Raspberry Pi Animates Sign Made of Phillips Hue LED Bulbs

Chinese GPU Companies See AI Opportunities, Despite Nvidia: Report

By Zhiye LiuAugust 23, 2023

By Sarah Jacobsson PurewalAugust 23, 2023

By Andrew E. FreedmanAugust 22, 2023

By Christian EberleAugust 22, 2023

By Denise BertacchiAugust 21, 2023

By Shane DowningAugust 20, 2023

By Brandon HillAugust 19, 2023

By Jarred WaltonAugust 18, 2023

By Shane DowningAugust 18, 2023

By Joe StanganelliAugust 17, 2023

By Sarah Jacobsson PurewalAugust 17, 2023